https://docs.uavlas.com/docs/library/uls-deconet-uart-transport/Recent content in ULS-DeCoNet UART Transport on UAVLAS DocsHugoenhttps://docs.uavlas.com/docs/library/uls-deconet-uart-transport/ulsdc-pbds031125/Mon, 01 Jan 0001 00:00:00 +0000https://docs.uavlas.com/docs/library/uls-deconet-uart-transport/ulsdc-pbds031125/<blockquote> <p><strong>ULSDC-PBDS031125</strong> · version 1.0.9 · issued November 13, 2025<br> The numbered PDF is the controlled copy: <a href="https://downloads.nex-s01.uavlas.com">download it from the portal</a>.</p> </blockquote> <h2 id="introduction">Introduction<a class="td-heading-self-link" href="#introduction" aria-label="Heading self-link"></a></h2><h3 id="purpose">Purpose<a class="td-heading-self-link" href="#purpose" aria-label="Heading self-link"></a></h3><p>This document specifies the UART framing layer of the ULS-DeCoNet protocol, providing detailed information about packet delimiting, byte stuffing, and error detection mechanisms.</p> <h3 id="scope">Scope<a class="td-heading-self-link" href="#scope" aria-label="Heading self-link"></a></h3><p>The UART protocol layer operates between the Physical Layer (UART hardware) and the Network Layer (IF protocol), providing:</p> <ul> <li>Frame delimiting</li> <li>Error detection (CRC/checksum)</li> <li>Transparent data transmission</li> <li>Multiple operating modes</li> </ul> <hr> <h2 id="physical-layer">Physical Layer<a class="td-heading-self-link" href="#physical-layer" aria-label="Heading self-link"></a></h2><h3 id="uart-configuration">UART Configuration<a class="td-heading-self-link" href="#uart-configuration" aria-label="Heading self-link"></a></h3><p><strong>Standard Settings</strong>:</p>